You’ll get a rugged 1.5″ ball mount with a transducer arm that secures compact fishfinders on kayaks, SUPs, and small boats. It’s corrosion-resistant, uses high-strength composite parts, and offers smooth full-range motion with multiple hole patterns for varied footprints. Installation is tool-minimal but requires verifying deck thickness and routing transducer cables. It keeps displays steady in chop and preserves sonar alignment, with a lifetime warranty covering defects — continue for full setup and compatibility details.
Some Key Takeaways
- Rugged 1.5″ ball mount offers secure, low-vibration hold for compact fishfinders on kayaks and SUPs.
- Includes transducer arm and corrosion-resistant hardware for reliable sonar alignment and saltwater durability.
- Fits Garmin Striker/Vivid, Lowrance Elite 3x–5x, Humminbird Helix 5, Piranha Max 4Di, and similar compact units.
- Tool-minimal installation; verify deck thickness, hole pattern match, and route cables with service loops.
- Lifetime warranty and email support cover defects, though occasional hardware retightening may be needed.
Quick Verdict : Who Should Buy the STRG Fish Finder Mount
If you paddle a kayak, SUP, or small boat and need a dependable way to mount a fishfinder or chartplotter, the STRG Fish Finder Mount is a solid choice—especially if you own compatible units like Garmin Striker/Vivid 4-series, Lowrance Elite 3x–5x, Humminbird Helix 5, or similar devices. You’ll want this if your buyer profile values rugged, corrosion-resistant mounting with adjustable positioning and a transducer arm. It suits anglers prioritizing kayak portability without sacrificing clamping force or motion range. You won’t get luxury aesthetics, but you’ll get reliable function, long-term service, and lifetime warranty-backed support for marine use. The mount pairs well with other essential paddling gear such as deck-mount pumps that enhance safety and convenience on the water.
What’s in the Box and Key Design Features
Now that you know who this mount suits, here’s what you’ll find in the box and how the design supports use. You get a transducer arm, 1.5″ ball marine electronics base with track, and a kit of mounting hardware including screws and clamps. Components are high-strength composite and corrosion-resistant for marine use. The 1.5″ ball delivers higher clamping force and smooth full-range motion; multiple hole patterns accommodate various units. Installation is tool-minimal; adjustments lock securely. Packaging includes basic instructions and lifetime warranty info. The design prioritizes durability, adjustability, and secure attachment for kayak and small-boat electronics. The product is ideal for paddlers and small-boat anglers who enjoy open water adventures.
Compatibility Checklist : Which Fishfinders and Boats It Fits
Because the Strg Fish Finder Mount was built for small platforms, you’ll find it fits most compact fishfinders and GPS units used on kayaks, SUPs, and small boats. Check model compatibility: listed units include Garmin Striker/Vivid series, Lowrance Elite series, Humminbird Helix 5, Piranha Max 4Di, plus many compact chartplotters. The mount’s multiple hole patterns and 1.5″ ball base accommodate varied footprints. For boat sizing, verify deck thickness, rail type, and transducer routing on kayaks or small boats. The composite, corrosion-resistant build supports typical loads; consult support if your unit’s footprint or boat geometry is nonstandard. Our shop also offers a range of kayaks and accessories designed for kayak fish finder mounts and water adventures.
Installation Walkthrough and Common Setup Tips
When you install the Strg Fish Finder Mount, start by confirming your kayak or boat mounting surface and fishfinder footprint match the mount’s hole patterns and 1.5″ ball base so you avoid last‑minute adjustments. Position the base on a flat, reinforced area, mark holes, and drill per template dimensions. Torque fasteners to specified mounting torque—tighten progressively to avoid stress concentrations. Fit the transducer arm and verify articulation range. Route power and transducer cables along the hull using clips or conduit for clean cable management, leaving service loops. Test swivel and tilt under load, then recheck fastener torque after first outing. Kayak owners should also consider ergonomic placement for easy reach and visibility, and consult mounting surface guidelines when choosing the installation location.
Performance, Durability, and Warranty : Real-World Pros and Cons
Although the Strg Fish Finder Mount looks simple, you’ll notice reliable on-water performance: the 1.5″ ball and high-strength composite keep the display steady under chop and when reeling hard, and the transducer arm holds alignment for consistent returns. You’ll find vibration resistance effective on trolling and rough wakes; readings stay legible and the sensor stays aligned. Corrosion-resistant materials pass basic waterproof testing and resist salt exposure, reducing maintenance. Lifetime warranty and email support cover defects and installation issues, but real-world pros include solid stability and low upkeep, while cons are limited adjustability for oversized units and occasional hardware tightening. It’s a great choice for paddlers looking to enhance their kayak fishing setup without adding excessive weight.
Some Questions Answered
Can the Mount Be Used on Aluminum Jon Boats With Gunwale Plates?
Yes — you can install the mount on aluminum jon boats with gunwale plates. Mount compatibility is high: the marine electronics ball mount base and multiple screw hole patterns let you attach to plates or rails. Use corrosion-resistant hardware and make certain proper backing or reinforcement to distribute loads. Check transducer arm clearance and tightness regularly. For reduced hardware corrosion, use stainless fasteners and marine-grade sealant; lifetime warranty and email support apply.
Does the Mount Interfere With Rod Storage or Casting Arcs?
No, it generally won’t interfere with rod storage or casting arcs. You’ll get sufficient rod clearance when you position the 1.5″ ball mount and transducer arm to the side or rear, preserving casting ergonomics. Adjustability and multiple hole patterns let you optimize placement for your kayak layout. Use the strong clamp and composite construction to secure higher or lower as needed; test casting paths before final tightening to confirm clearance.
Are Spare Screws or Hardware Available Separately?
Yes — you can get replacement screws and mounting adapters separately. Contact customer support via the provided email to request spare hardware; they’ll confirm compatible screw sizes and available adapter patterns for your fishfinder model. The mount’s multiple hole patterns and 1.5″ ball base mean they may supply specific screws or adapter pieces to match. Parts are corrosion-resistant and meant for long-term service; warranty may cover missing or faulty hardware.
Can the Transducer Arm Accommodate Skeg-Style Transducers?
Yes — you can fit many skeg-style transducers, but check transducer compatibility and arm clearance. The included transducer mounting arm offers adjustable length and multiple hole patterns, providing sufficient clearance for most skeg shapes and cable exits. Measure your transducer’s bracket footprint and skeg thickness against the arm’s mounting plate and recommended clearance. If dimensions exceed the arm’s reach or hole spacing, contact support for compatibility guidance or alternative hardware.
Is There a Quick-Release Option for Switching Boats?
Yes — you can use quick release adapters to swap the mount between boats for cross boat compatibility. The mount’s 1.5″ ball/base and marine track accept common quick-release plates and clamps, letting you detach the head and reattach on another track or base. Installation stays secure thanks to the robust composite construction and multiple hole patterns. For best results, match plate type and verify alignment before deployment.
