You’ll get the Milwaukee 2696-24 combo kit loaded for framing, fastening, and light demo. The 1/2″ hammer drill/driver delivers up to 550 in-lbs and 1,700 rpm, with clutch control and a masonry hammer mode. The M18 Sawzall is built to cut studs, old drywall, nails, and stubborn pipe. You’ll also use the 1/4″ hex impact driver (up to 1,400 in-lbs) plus a rotating work light. With two XC batteries and a 1-hour charger, you’ll stay productive, and there’s more to know about real-world use ahead.
Some Key Takeaways
- The 2696-24 combo kit includes a 1/2-inch hammer drill/driver, M18 Sawzall, 1/4-inch impact driver, work light, two batteries, and a 1-hour charger.
- The drill delivers up to 1,700 RPM and 550 in-lbs peak torque, with adjustable clutch control and a hammer mode for masonry.
- The Sawzall reciprocating saw is built for demolition and remodel cutting, including nails, studs, and pipe, with reduced shock via its clutch.
- The impact driver provides up to 1,400 in-lbs torque and reduced bit spin, helping drive lag and screws efficiently.
- The work light’s rotating head and the included two batteries support practical jobsite use and runtime for drilling and fastening.
Milwaukee 2696-24 Kit Contents and What Each Tool Does
Before you start drilling, cutting, or fastening, review what Milwaukee bundles in the 2696-24 M18 Cordless Compact Combo Tool Kit so you know exactly which job each piece covers. You get a 1/2-inch hammer drill/driver for holes and screws, an M18 Sawzall reciprocating saw for demolition and cut-through work, and a 1/4-inch hex impact driver for fasteners that need extra bite. You also get an M18 work light for visibility, plus two batteries and a 1-hour charger. Because this kit is built to support multiple common tasks right out of the box, it makes a great tool gift for family, friends, coworkers, and contractors. Use the contractor bag as your Tool organizer and jobsite storage companion, and you’ll stay ready.
How the M18 Hammer Drill/Driver Performs for Drilling Tasks
The Milwaukee 2696-24’s M18 1/2-inch hammer drill/driver gives you solid, job-ready power for everyday drilling and fastening, thanks to its 18V 4-pole frameless motor. You’ll feel confident driving masonry and wood holes with 550 in-lbs of peak torque and up to 1,700 rpm when speed matters. Use the clutch control to dial back bite, reduce wandering, and keep your work consistent. For hole accuracy, start with steady trigger control, then maintain pressure through the bit’s cutting stroke. You’ll finish faster because you don’t have to correct misdrilled holes. Its hammer drill mode lets you switch from clean drilling to masonry impact when you need it.
Milwaukee 2696-24 Sawzall Reciprocating Saw Use-Cases and Benefits
If you need a versatile cordless blade action for demolition, remodeling, or fast cut-through work, the Milwaukee 2696-24’s M18 Sawzall reciprocating saw earns its place. You’ll use it to split studs, trim old drywall, cut stubborn nails, and tackle pipe or conduit with the right blade. That’s the Sawzall Cutting Versatility you’ll feel on the job. You also benefit from clutch protection: the patented gear-protecting clutch and counter balance help reduce shock loads, so your saw stays ready for the next cut. You’ll work with more confidence, and you’ll belong on crews that move fast. This is exactly the kind of dependable tool many contractors and jobsite pros look for in a reciprocating saw kit.
Impact Driver and Work Light Specs for Faster Installs
Dial in faster installs with the kit’s M18 1/4-inch hex impact driver, built around a 4-pole frameless motor that delivers up to 1,400 in-lbs of torque. You drive screws and lag fast through framing or deck builds, without fighting bit spin. For visibility, you get dedicated Work light features: a fold-away hook for hands-free placement and a 135-degree rotating head that aims light exactly where you work. Setups feel smoother thanks to tool free installs, so you swap bits quickly and stay in your flow. Underhood lighting also makes it easier to spot hardware and connection points in tight spaces during quick installs.
Battery and Charger Runtime: What to Expect With Two XC Packs
With two M18 XC High-Capacity Red Lithium batteries included, you can usually plan your runtime around your workload and bit/driver setting, then recharge quickly when you’re ready to keep going. In a typical combo session, you’ll feel solid Two pack runtime for light drilling and impact driving, and you’ll stretch real world endurance further when you avoid full-torque stalls. The 1-hour charger helps you recover fast between tasks—swap packs at breaks, then jump back in without long downtime. You’ll stay part of the flow, not the pause.
Some Questions Answered
Is the Kit Compatible With Older Milwaukee M18 Battery Packs?
Yes, it’s compatible with older Milwaukee M18 battery packs—as long as they’re true M18 Lithium-Ion packs. You should check Battery compatibility limits by confirming the pack label says “M18” (not “M12”). Use your older batteries in the same slots, and you’ll get normal power. For voltage fit guidance, remember it runs on 18 volts, so any M18 battery works.
What Drill/Driver Chuck Size Fits Standard Drill Bits and Accessories?
You get strong 1/2 inch chuck compatibility that fits standard drill bits and most accessories. The 1/2 in keyless chuck grips bit shanks in the usual bit shank standards used across common sets, so you won’t feel left out when switching between regular metal, wood, or masonry bits. If your accessory uses a standard cylindrical shank, it should seat securely and run true.
Does the Sawzall Include Tool-Free Blade Changes or a Keyless Mechanism?
Yes, you get Tool free saw maintenance on the Sawzall via a quick-change blade system, so you swap blades without tools. In practice, you press the release, pull the old blade out, and insert the new one until it locks. That said, keep keyless blade safety in mind: tug the blade firmly and confirm the latch engages before you cut. This keeps you confident and connected to the job.
How Loud Is the Impact Driver During Fast Driving and Drilling?
You can expect the impact driver to be loud during fast driving, with a sharp hammering “impact sound” rather than a smooth whir. In practical use, it’ll carry through studs and can rattle nearby surfaces, so plan for drywall vibration effects—especially if you’re drilling or fastening close to thin panels. If you wear ear protection and hold the tool firmly, you’ll keep the noise and vibration more manageable.
What’s the Warranty Coverage and Return Policy for This Kit?
You’ll get a Voluntary 30-Day Return Guarantee, giving you a clear return window options to try the kit and send it back if it doesn’t fit your needs. For warranty coverage, you’ll need to check the specific Milwaukee product warranty details via the listing’s linked warranty information, since the text doesn’t state an exact Customer support duration or warranty length here.
